Herrmidifier 1322-1 Drum Motor 120V
List Price: $150.01 Sale Price: $125.01
Replacement 120V Drum Motor.
NOTE: This component is OBSOLETE. When ordering this part you will receive the replacement 24V motor part 1322 plus a transformer part G-139 that will drop the voltage down from 120 volts to 24 volts. You will need to install the new transformer in series ahead of the motor.
The manufacturer is sometimes referred to as Trion, Fedders, Hermidifier but is correctly spelled Herrmidifier.
Mounting Problems by Larry Belmont (Wormleysburg PA )
Transformer does fit inside the 2000. You may want to get an extra electrical fixture box to hold the transformer and protect the "LINE" side connections. Grounding wiring is not specified.
user by Mozes Guttman (Brooklyn Ne US)
works excellant now To early to comment it's performance for long term.
1322-1 Drum Motor 120V by Russ Anderson (Mechanicsbirg Pa US)
Excellent service in helping me make the selection, in timely delivery, and it works fine! Wish the 120v version was still available, since the transformer needed to step down to the lower voltage presented a challenge.
Drum Motor by Brian Nutley (Staten Island NY US)
Motor worked out fine. Was a bit put out that it no longer was available in 115V. The transformer proved to be a bit of a pain in the ass. There was no way to mount it conveinient to the motor.It should have had brackets or such included!!!! As it was I drilled a connector hole in the bottom of the motor cover and used the connector and nut to finish the mount. The average guy does not have a 3/4" bit, thanks to my pal "Eddie tools"